Re: [PATCH] cpufreq: CPPC: Resolve the large frequency discrepancy from cpuinfo_cur_freq
From: Beata Michalska
Date: Fri Feb 02 2024 - 03:11:16 EST
On Wed, Jan 17, 2024 at 05:18:40PM +0800, lihuisong (C) wrote:
Hi ,
Again, apologies for delay,
> Hi,
>
> 在 2024/1/16 22:10, Beata Michalska 写道:
> > Hi,
> >
> > Apologies for jumping in so late....
> >
> > On Wed, Jan 10, 2024 at 03:09:48PM +0800, lihuisong (C) wrote:
> > > Hi Ionela,
> > >
> > > 在 2024/1/8 22:03, Ionela Voinescu 写道:
> > > > Hi,
> > > >
> > > > On Friday 05 Jan 2024 at 15:04:47 (+0800), lihuisong (C) wrote:
> > > > > Hi Vanshi,
> > > > >
> > > > > 在 2024/1/5 8:48, Vanshidhar Konda 写道:
> > > > > > On Thu, Jan 04, 2024 at 05:36:51PM +0800, lihuisong (C) wrote:
> > > > > > > 在 2024/1/4 1:53, Ionela Voinescu 写道:
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > On Tuesday 12 Dec 2023 at 15:26:17 (+0800), Huisong Li wrote:
> > > > > > > > > Many developers found that the cpu current frequency is greater than
> > > > > > > > > the maximum frequency of the platform, please see [1], [2] and [3].
> > > > > > > > >
> > > > > > > > > In the scenarios with high memory access pressure, the patch [1] has
> > > > > > > > > proved the significant latency of cpc_read() which is used to obtain
> > > > > > > > > delivered and reference performance counter cause an absurd frequency.
> > > > > > > > > The sampling interval for this counters is very critical and
> > > > > > > > > is expected
> > > > > > > > > to be equal. However, the different latency of cpc_read() has a direct
> > > > > > > > > impact on their sampling interval.
> > > > > > > > >
> > > > > > > > Would this [1] alternative solution work for you?
> > > > > > > It would work for me AFAICS.
> > > > > > > Because the "arch_freq_scale" is also from AMU core and constant
> > > > > > > counter, and read together.
> > > > > > > But, from their discuss line, it seems that there are some tricky
> > > > > > > points to clarify or consider.
> > > > > > I think the changes in [1] would work better when CPUs may be idle. With
> > > > > > this
> > > > > > patch we would have to wake any core that is in idle state to read the
> > > > > > AMU
> > > > > > counters. Worst case, if core 0 is trying to read the CPU frequency of
> > > > > > all
> > > > > > cores, it may need to wake up all the other cores to read the AMU
> > > > > > counters.
> > > > > From the approach in [1], if all CPUs (one or more cores) under one policy
> > > > > are idle, they still cannot be obtained the CPU frequency, right?
> > > > > In this case, the [1] API will return 0 and have to back to call
> > > > > cpufreq_driver->get() for cpuinfo_cur_freq.
> > > > > Then we still need to face the issue this patch mentioned.
> > > > With the implementation at [1], arch_freq_get_on_cpu() will not return 0
> > > > for idle CPUs and the get() callback will not be called to wake up the
> > > > CPUs.
> > > Right, arch_freq_get_on_cpu() will not return 0 for idle CPUs.
> > > However, for no-housekeeping CPUs, it will return 0 and have to call get()
> > > callback, right?
> > > > Worst case, arch_freq_get_on_cpu() will return a frequency based on the
> > > > AMU counter values obtained on the last tick on that CPU. But if that CPU
> > > > is not a housekeeping CPU, a housekeeping CPU in the same policy will be
> > > > selected, as it would have had a more recent tick, and therefore a more
> > > > recent frequency value for the domain.
> > > But this frequency is from the last tick,
> > > this last tick is probably a long time ago and it doesn't update
> > > 'arch_freq_scale' for some reasons like CPU dile.
> > > In addition, I'm not sure if there is possible that amu_scale_freq_tick() is
> > > executed delayed under high stress case.
> > > It also have an impact on the accuracy of the cpu frequency we query.
> > > > I understand that the frequency returned here will not be up to date,
> > > > but there's no proper frequency feedback for an idle CPU. If one only
> > > > wakes up a CPU to sample counters, before the CPU goes back to sleep,
> > > > the obtained frequency feedback is meaningless.
> > > >
> > > > > > For systems with 128 cores or more, this could be very expensive and
> > > > > > happen
> > > > > > very frequently.
> > > > > >
> > > > > > AFAICS, the approach in [1] would avoid this cost.
> > > > > But the CPU frequency is just an average value for the last tick period
> > > > > instead of the current one the CPU actually runs at.
> > > > > In addition, there are some conditions to use 'arch_freq_scale' in this
> > > > > approach.
> > > > What are the conditions you are referring to?
> > > It depends on the housekeeping CPUs.
> > > > > So I'm not sure if this approach can entirely cover the frequency
> > > > > discrepancy issue.
> > > > Unfortunately there is no perfect frequency feedback. By the time you
> > > > observe/use the value of scaling_cur_freq/cpuinfo_cur_freq, the frequency
> > > > of the CPU might have already changed. Therefore, an average value might
> > > > be a better indication of the recent performance level of a CPU.
> > > An average value for CPU frequency is ok. It may be better if it has not any
> > > delaying.
> > >
> > > The original implementation for cpuinfo_cur_freq can more reflect their
> > > meaning in the user-guide [1]. The user-guide said:
> > > "cpuinfo_cur_freq : Current frequency of the CPU as obtained from the
> > > hardware, in KHz.
> > > This is the frequency the CPU actually runs at."
> > >
> > >
> > > [1]https://www.kernel.org/doc/Documentation/cpu-freq/user-guide.txt
> > >
> > > > Would you be able to test [1] on your platform and usecase?
> > > I has tested it on my platform (CPU number: 64, SMT: off and CPU base
> > > frequency: 2.7GHz).
> > > Accoding to the testing result,
> > > 1> I found that patch [1] and [2] cannot cover the no housekeeping CPUs.
> > > They still have to face the large frequency discrepancy issue my patch
> > > mentioned.
> > > 2> Additionally, the frequency value of all CPUs are almost the same by
> > > using the 'arch_freq_scale' factor way. I'm not sure if it is ok.
> > >
> > > The patch [1] has been modified silightly as below:
> > > -->
> > > @@ -1756,7 +1756,10 @@ static unsigned int
> > > cpufreq_verify_current_freq(struct cpufreq_policy *policy, b
> > > {
> > > unsigned int new_freq;
> > >
> > > - new_freq = cpufreq_driver->get(policy->cpu);
> > > + new_freq = arch_freq_get_on_cpu(policy->cpu);
> > > + if (!new_freq)
> > > + new_freq = cpufreq_driver->get(policy->cpu);
> > > +
> > As pointed out this change will not make it to the next version of the patch.
> > So I'd say you can safely ignore it and assume that arch_freq_get_on_cpu will
> > only be wired for sysfs nodes for scaling_cur_freq/cpuinfo_cur_freq
> > > if (!new_freq)
> > > return 0;
> > >
> > > And the result is as follows:
> > > *case 1:**No setting the nohz_full and cpufreq use performance governor*
> > > *--> Step1: *read 'cpuinfo_cur_freq' in no pressure
> > > 0: 2699264 2: 2699264 4: 2699264 6: 2699264
> > > 8: 2696628 10: 2696628 12: 2696628 14: 2699264
> > > 16: 2699264 18: 2696628 20: 2699264 22: 2696628
> > > 24: 2699264 26: 2696628 28: 2699264 30: 2696628
> > > 32: 2696628 34: 2696628 36: 2696628 38: 2696628
> > > 40: 2699264 42: 2699264 44: 2696628 46: 2696628
> > > 48: 2696628 50: 2699264 52: 2699264 54: 2696628
> > > 56: 2696628 58: 2696628 60: 2696628 62: 2696628
> > > 64: 2696628 66: 2699264 68: 2696628 70: 2696628
> > > 72: 2699264 74: 2696628 76: 2696628 78: 2699264
> > > 80: 2696628 82: 2696628 84: 2699264 86: 2696628
> > > 88: 2696628 90: 2696628 92: 2696628 94: 2699264
> > > 96: 2696628 98: 2699264 100: 2699264 102: 2696628
> > > 104: 2699264 106: 2699264 108: 2699264 110: 2696628
> > > 112: 2699264 114: 2699264 116: 2699264 118: 2699264
> > > 120: 2696628 122: 2699264 124: 2696628 126: 2699264
> > > Note: the frequency of all CPUs are almost the same.
> > Were you expecting smth else ?
> The frequency of each CPU might have a different value.
> All value of all CPUs is the same under high pressure.
> I don't know what the phenomenon is on other platform.
> Do you know who else tested it?
So I might have rushed a bit with my previous comment/question: apologies for
that.
The numbers above: those are on a fairly idle/lightly loaded system right?
Would you mind having another go with just the arch_freq_get_on_cpu
implementation beign added and dropping the changes in the cpufreq and
then read 'scaling_cur_freq', doing several reads in some intervals ?
The change has been tested on RD-N2 model (Neoverse N2 ref platform),
it has also been discussed here [1]
> > > *--> Step 2: *read 'cpuinfo_cur_freq' in the high memory access pressure.
> > > 0: 2696628 2: 2696628 4: 2696628 6: 2696628
> > > 8: 2696628 10: 2696628 12: 2696628 14: 2696628
> > > 16: 2696628 18: 2696628 20: 2696628 22: 2696628
> > > 24: 2696628 26: 2696628 28: 2696628 30: 2696628
> > > 32: 2696628 34: 2696628 36: 2696628 38: 2696628
> > > 40: 2696628 42: 2696628 44: 2696628 46: 2696628
> > > 48: 2696628 50: 2696628 52: 2696628 54: 2696628
> > > 56: 2696628 58: 2696628 60: 2696628 62: 2696628
> > > 64: 2696628 66: 2696628 68: 2696628 70: 2696628
> > > 72: 2696628 74: 2696628 76: 2696628 78: 2696628
> > > 80: 2696628 82: 2696628 84: 2696628 86: 2696628
> > > 88: 2696628 90: 2696628 92: 2696628 94: 2696628
> > > 96: 2696628 98: 2696628 100: 2696628 102: 2696628
> > > 104: 2696628 106: 2696628 108: 2696628 110: 2696628
> > > 112: 2696628 114: 2696628 116: 2696628 118: 2696628
> > > 120: 2696628 122: 2696628 124: 2696628 126: 2696628
> > >
> > > *Case 2: setting nohz_full and cpufreq use ondemand governor*
> > > There is "isolcpus=1-10,41-50 nohz_full=1-10,41-50 rcu_nocbs=1-10,41-50" in
> > > /proc/cmdline.
> > Right, so if I remember correctly nohz_full implies rcu_nocbs, so no need to
> > set that one.
> > Now, afair, isolcpus will make the selected CPUs to disappear from the
> > schedulers view (no balancing, no migrating), so unless you affine smth
> > explicitly to those CPUs, you will not see much of an activity there.
> Correct.
> > Need to double check though as it has been a while ...
> > > *--> Step 1: *setting ondemand governor to all policy and query
> > > 'cpuinfo_cur_freq' in no pressure case.
> > > And the frequency of CPUs all are about 400MHz.
> > > *--> Step 2:* read 'cpuinfo_cur_freq' in the high memory access pressure.
> > > The high memory access pressure is from the command: "stress-ng -c 64
> > > --cpu-load 100% --taskset 0-63"
> > I'm not entirely convinced that this will affine to isolated cpus, especially
> > that the affinity mask spans all available cpus. If that is the case, no wonder
> > your isolated cpus are getting wasted being idle. But I would have to double
> > check how this is being handled.
> > > The result:
> > > 0: 2696628 1: 400000 2: 400000 3: 400909
> > > 4: 400000 5: 400000 6: 400000 7: 400000
> > > 8: 400000 9: 400000 10: 400600 11: 2696628
> > > 12: 2696628 13: 2696628 14: 2696628 15: 2696628
> > > 16: 2696628 17: 2696628 18: 2696628 19: 2696628
> > > 20: 2696628 21: 2696628 22: 2696628 23: 2696628
> > > 24: 2696628 25: 2696628 26: 2696628 27: 2696628
> > > 28: 2696628 29: 2696628 30: 2696628 31: 2696628
> > > 32: 2696628 33: 2696628 34: 2696628 35: 2696628
> > > 36: 2696628 37: 2696628 38: 2696628 39: 2696628
> > > 40: 2696628 41: 400000 42: 400000 43: 400000
> > > 44: 400000 45: 398847 46: 400000 47: 400000
> > > 48: 400000 49: 400000 50: 400000 51: 2696628
> > > 52: 2696628 53: 2696628 54: 2696628 55: 2696628
> > > 56: 2696628 57: 2696628 58: 2696628 59: 2696628
> > > 60: 2696628 61: 2696628 62: 2696628 63: 2699264
> > >
> > > Note:
> > > (1) The frequency of 1-10 and 41-50 CPUs work on the lowest frequency.
> > > It turned out that nohz full was already work.
> > > I guess that stress-ng cannot use the CPU in the range of nohz full.
> > > Because the CPU frequency will be increased to 2.7G by binding CPU to
> > > other application.
> > > (2) The frequency of the nohz full core is calculated by get() callback
> > > according to ftrace.
> > It is as there is no sched tick on those, and apparently there is nothing
> > running on them either.
> Yes.
> If we select your approach and the above phenomenon is normal,
> the large frequency discrepancy issue can be resolved for CPUs with sched
> tick by the way.
> But the nohz full cores still have to face this issue. So this patch is also
> needed.
>
Yes, nohz cores full have to be handled by the cpufreq driver.
---
[1] https://lore.kernel.org/lkml/ZIHpd6unkOtYVEqP@xxxxxxxxxxxxxxxxxxxxxxxxx/T/#m4e74cb5a0aaa353c60fedc6cfb95ab7a6e381e3c
---
BR
Beata
> BR
> /huisong
> >
> > Unless I am missing smth.
> >
> > ---
> > BR
> > Beata
> >
> > > [1] https://lore.kernel.org/lkml/20230418113459.12860-7-sumitg@xxxxxxxxxx/
> > > [2] https://lore.kernel.org/lkml/20231127160838.1403404-3-beata.michalska@xxxxxxx/
> > > > Many thanks,
> > > > Ionela.
> > > >
> > > > > /Huisong
> > > > >
> > > > > > > > [1] https://lore.kernel.org/lkml/20231127160838.1403404-1-beata.michalska@xxxxxxx/
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > > Ionela.
> > > > > > > >
> > > > > > > > > This patch adds a interface, cpc_read_arch_counters_on_cpu, to read
> > > > > > > > > delivered and reference performance counter together. According to my
> > > > > > > > > test[4], the discrepancy of cpu current frequency in the
> > > > > > > > > scenarios with
> > > > > > > > > high memory access pressure is lower than 0.2% by stress-ng
> > > > > > > > > application.
> > > > > > > > >
> > > > > > > > > [1] https://lore.kernel.org/all/20231025093847.3740104-4-zengheng4@xxxxxxxxxx/
> > > > > > > > > [2] https://lore.kernel.org/all/20230328193846.8757-1-yang@xxxxxxxxxxxxxxxxxxxxxx/
> > > > > > > > > [3]
> > > > > > > > > https://lore.kernel.org/all/20230418113459.12860-7-sumitg@xxxxxxxxxx/
> > > > > > > > >
> > > > > > > > > [4] My local test:
> > > > > > > > > The testing platform enable SMT and include 128 logical CPU in total,
> > > > > > > > > and CPU base frequency is 2.7GHz. Reading "cpuinfo_cur_freq" for each
> > > > > > > > > physical core on platform during the high memory access pressure from
> > > > > > > > > stress-ng, and the output is as follows:
> > > > > > > > > 0: 2699133 2: 2699942 4: 2698189 6: 2704347
> > > > > > > > > 8: 2704009 10: 2696277 12: 2702016 14: 2701388
> > > > > > > > > 16: 2700358 18: 2696741 20: 2700091 22: 2700122
> > > > > > > > > 24: 2701713 26: 2702025 28: 2699816 30: 2700121
> > > > > > > > > 32: 2700000 34: 2699788 36: 2698884 38: 2699109
> > > > > > > > > 40: 2704494 42: 2698350 44: 2699997 46: 2701023
> > > > > > > > > 48: 2703448 50: 2699501 52: 2700000 54: 2699999
> > > > > > > > > 56: 2702645 58: 2696923 60: 2697718 62: 2700547
> > > > > > > > > 64: 2700313 66: 2700000 68: 2699904 70: 2699259
> > > > > > > > > 72: 2699511 74: 2700644 76: 2702201 78: 2700000
> > > > > > > > > 80: 2700776 82: 2700364 84: 2702674 86: 2700255
> > > > > > > > > 88: 2699886 90: 2700359 92: 2699662 94: 2696188
> > > > > > > > > 96: 2705454 98: 2699260 100: 2701097 102: 2699630
> > > > > > > > > 104: 2700463 106: 2698408 108: 2697766 110: 2701181
> > > > > > > > > 112: 2699166 114: 2701804 116: 2701907 118: 2701973
> > > > > > > > > 120: 2699584 122: 2700474 124: 2700768 126: 2701963
> > > > > > > > >
> > > > > > > > > Signed-off-by: Huisong Li <lihuisong@xxxxxxxxxx>
> > > > > > > > > ---
> > > [snip]
> > > > .
> > .