Re: [RFC PATCH 11/13] arm64: dts: ti: k3-am62p: Add missing properties for MMC

[Roger Quadros]

On 31/01/2024 02:37, Judith Mendez wrote:
> Add missing properties to enable HS200 timing for MMC0 and
> SDR104 timing for MMC1 according to the datasheet [0] for
> AM62p device, refer to Table 7-79 for MMC0 and Table 7-97
> for MMC1/MMC2.
> 
> [0] https://www.ti.com/lit/ds/symlink/am625.pdf
> 
> Signed-off-by: Judith Mendez <jm@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 +++++++++++++++++++++--
>  arch/arm64/boot/dts/ti/k3-am62p5-sk.dts   |  6 ++--
>  2 files changed, 45 insertions(+), 5 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> index 4c51bae06b57..f743700dd5bd 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
> @@ -534,7 +534,21 @@ sdhci0: mmc@fa10000 {
>  		clock-names = "clk_ahb", "clk_xin";
>  		assigned-clocks = <&k3_clks 57 2>;
>  		assigned-clock-parents = <&k3_clks 57 4>;
> -		ti,otap-del-sel-legacy = <0x0>;
> +		bus-width = <8>;
> +		mmc-ddr-1_8v;
> +		mmc-hs200-1_8v;
> +		mmc-hs400-1_8v;
> +		ti,clkbuf-sel = <0x7>;
> +		ti,strobe-sel = <0x77>;
> +		ti,trm-icp = <0x8>;
> +		ti,otap-del-sel-legacy = <0x1>;
> +		ti,otap-del-sel-mmc-hs = <0x1>;
> +		ti,otap-del-sel-ddr52 = <0x6>;
> +		ti,otap-del-sel-hs200 = <0x8>;
> +		ti,otap-del-sel-hs400 = <0x5>;
> +		ti,itap-del-sel-legacy = <0x10>;
> +		ti,itap-del-sel-mmc-hs = <0xa>;
> +		ti,itap-del-sel-ddr52 = <0x3>;
>  		status = "disabled";
>  	};
>  
> @@ -545,7 +559,19 @@ sdhci1: mmc@fa00000 {
>  		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
>  		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
>  		clock-names = "clk_ahb", "clk_xin";
> -		ti,otap-del-sel-legacy = <0x8>;
> +		bus-width = <4>;
> +		ti,clkbuf-sel = <0x7>;
> +		ti,otap-del-sel-legacy = <0x0>;
> +		ti,otap-del-sel-sd-hs = <0x0>;
> +		ti,otap-del-sel-sdr12 = <0xf>;
> +		ti,otap-del-sel-sdr25 = <0xf>;
> +		ti,otap-del-sel-sdr50 = <0xc>;
> +		ti,otap-del-sel-ddr50 = <0x9>;
> +		ti,otap-del-sel-sdr104 = <0x6>;
> +		ti,itap-del-sel-legacy = <0x0>;
> +		ti,itap-del-sel-sd-hs = <0x0>;
> +		ti,itap-del-sel-sdr12 = <0x0>;
> +		ti,itap-del-sel-sdr25 = <0x0>;
>  		status = "disabled";
>  	};
>  
> @@ -556,7 +582,19 @@ sdhci2: mmc@fa20000 {
>  		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
>  		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
>  		clock-names = "clk_ahb", "clk_xin";
> -		ti,otap-del-sel-legacy = <0x8>;
> +		bus-width = <4>;
> +		ti,clkbuf-sel = <0x7>;
> +		ti,otap-del-sel-legacy = <0x0>;
> +		ti,otap-del-sel-sd-hs = <0x0>;
> +		ti,otap-del-sel-sdr12 = <0xf>;
> +		ti,otap-del-sel-sdr25 = <0xf>;
> +		ti,otap-del-sel-sdr50 = <0xc>;
> +		ti,otap-del-sel-ddr50 = <0x9>;
> +		ti,otap-del-sel-sdr104 = <0x6>;
> +		ti,itap-del-sel-legacy = <0x0>;
> +		ti,itap-del-sel-sd-hs = <0x0>;
> +		ti,itap-del-sel-sdr12 = <0x0>;
> +		ti,itap-del-sel-sdr25 = <0x0>;
>  		status = "disabled";
>  	};
>  
> diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> index 1773c05f752c..10156a04a92c 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
> @@ -410,13 +410,17 @@ &main_i2c2 {
>  };
>  
>  &sdhci0 {
> +	/* eMMC */
> +	bootph-all;
>  	status = "okay";
> +	non-removable;
>  	ti,driver-strength-ohm = <50>;
>  	disable-wp;
>  };
>  
>  &sdhci1 {
>  	/* SD/MMC */
> +	bootph-all;
>  	status = "okay";
>  	vmmc-supply = <&vdd_mmc1>;
>  	vqmmc-supply = <&vddshv_sdio>;
> @@ -424,8 +428,6 @@ &sdhci1 {
>  	pinctrl-0 = <&main_mmc1_pins_default>;
>  	ti,driver-strength-ohm = <50>;
>  	disable-wp;
> -	no-1-8-v;

Why was 'no-1-8-v' removed?

> -	bootph-all;
>  };
>  
>  &cpsw3g {

-- 
cheers,
-roger