Re: Re: [PATCH v5 08/44] drm/connector: hdmi: Add Broadcast RGB property

[Maxime Ripard]

Hi Sebastian,

On Mon, Jan 15, 2024 at 03:33:08PM +0100, Sebastian Wick wrote:
> >  /**
> >   * DOC: HDMI connector properties
> >   *
> > + * Broadcast RGB
> > + *      Indicates the RGB Quantization Range (Full vs Limited) used.
> > + *      Infoframes will be generated according to that value.
> > + *
> > + *      The value of this property can be one of the following:
> > + *
> > + *      Automatic:
> > + *              RGB Range is selected automatically based on the mode
> > + *              according to the HDMI specifications.
> > + *
> > + *      Full:
> > + *              Full RGB Range is forced.
> > + *
> > + *      Limited 16:235:
> > + *              Limited RGB Range is forced. Unlike the name suggests,
> > + *              this works for any number of bits-per-component.
> > + *
> > + *      Drivers can set up this property by calling
> > + *      drm_connector_attach_broadcast_rgb_property().
> > + *
> 
> This is a good time to document this in more detail. There might be two
> different things being affected:
> 
> 1. The signalling (InfoFrame/SDP/...)
> 2. The color pipeline processing
> 
> All values of Broadcast RGB always affect the color pipeline processing
> such that a full-range input to the CRTC is converted to either full- or
> limited-range, depending on what the monitor is supposed to accept.
> 
> When automatic is selected, does that mean that there is no signalling,
> or that the signalling matches what the monitor is supposed to accept
> according to the spec? Also, is this really HDMI specific?
> 
> When full or limited is selected and the monitor doesn't support the
> signalling, what happens?

Leaving the YCbCr vs RGB discussion aside, would this be better ?

 * Broadcast RGB (HDMI specific)
 *      Indicates the Quantization Range (Full vs Limited) used. The color
 *      processing pipeline will be adjusted to match the value of the
 *      property, and the Infoframes will be generated and sent accordingly.
 *
 *      The value of this property can be one of the following:
 *
 *      Automatic:
 *              The quantization range is selected automatically based on the
 *              mode according to the HDMI specifications (HDMI 1.4b - Section
 *              6.6 - Video Quantization Ranges).
 *
 *      Full:
 *              Full quantization range is forced.
 *
 *      Limited 16:235:
 *              Limited quantization range is forced. Unlike the name suggests,
 *              this works for any number of bits-per-component.
 *
 *      Property values other than Automatic can result in colors being off (if
 *      limited is selected but the display expects full), or a black screen
 *      (if full is selected but the display expects limited).
 *
 *      Drivers can set up this property by calling
 *      drm_connector_attach_broadcast_rgb_property().

Thanks!
Maxime

Attachment: signature.asc
Description: PGP signature