Re: [PATCH v2] arm64: dts: qcom: sm8550: Switch UFS from opp-table-hz to opp-v2

From: Neil Armstrong
Date: Sat Feb 03 2024 - 15:13:03 EST


On 03/02/2024 01:10, Konrad Dybcio wrote:
Now that the non-legacy form of OPP is supported within the UFS driver,
go ahead and switch to it, adding support for more intermediate freq/power
states.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
Extracted out of:
https://lore.kernel.org/linux-arm-msm/15d2bd66-29f3-435b-8494-d82ec4036413@xxxxxxxxxx/#t

Changes since v1:
- Set the reference clock rate to 0 in opp entries, it doesn't support
ratesetting anyway. Confirmed UFS still works.
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 50 +++++++++++++++++++++++++++++-------
1 file changed, 41 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index c89d8f3dad21..144e20edf237 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1966,6 +1966,7 @@ ufs_mem_hc: ufs@1d84000 {
iommus = <&apps_smmu 0x60 0x0>;
dma-coherent;
+ operating-points-v2 = <&ufs_opp_table>;
interconnects = <&aggre1_noc MASTER_UFS_MEM 0 &mc_virt SLAVE_EBI1 0>,
<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_UFS_MEM_CFG 0>;
@@ -1986,18 +1987,49 @@ ufs_mem_hc: ufs@1d84000 {
<&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
<&gcc GCC_UFS_PHY_RX_SYMBOL_1_CLK>;
- freq-table-hz =
- <75000000 300000000>,
- <0 0>,
- <0 0>,
- <75000000 300000000>,
- <100000000 403000000>,
- <0 0>,
- <0 0>,
- <0 0>;
qcom,ice = <&ice>;
status = "disabled";
+
+ ufs_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <75000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-150000000 {
+ opp-hz = /bits/ 64 <150000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <150000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <300000000>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>,
+ /bits/ 64 <0>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
};
ice: crypto@1d88000 {

---
base-commit: 076d56d74f17e625b3d63cf4743b3d7d02180379
change-id: 20240203-topic-8550_ufs_oppv2-bb88d63a4c58

Best regards,

Tested-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> # on SM8550-QRD