Re: [PATCH V8 11/12] arm64: dts: imx8mp: add HDMI display pipeline

[Alexander Stein]

Hi Adam,

thanks for working on this.

Am Samstag, 3. Februar 2024, 17:52:51 CET schrieb Adam Ford:
> From: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> 
> This adds the DT nodes for all the peripherals that make up the
> HDMI display pipeline.
> 
> Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> 
> ---
> V2:  I took this from Lucas' original submission with the following:
>      Removed extra clock from HDMI-TX since it is now part of the
>      power domain
>      Added interrupt-parent to PVI
>      Changed the name of the HDMI tranmitter to fsl,imx8mp-hdmi-tx
>      Added ports to HDMI-tx
> ---
>  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 94 +++++++++++++++++++++++
>  1 file changed, 94 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index
> 5e51a766f3d9..e84b4f40e570 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -1412,6 +1412,100 @@ irqsteer_hdmi: interrupt-controller@32fc2000 {
>  				clock-names = "ipg";
>  				power-domains = <&hdmi_blk_ctrl 
IMX8MP_HDMIBLK_PD_IRQSTEER>;
>  			};
> +
> +			hdmi_pvi: display-bridge@32fc4000 {
> +				compatible = "fsl,imx8mp-hdmi-pvi";
> +				reg = <0x32fc4000 0x40>;
> +				interrupt-parent = <&irqsteer_hdmi>;
> +				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;

irqsteer_hdmi has #interrupt-cells = <1>, so IRQ flags should be removed. 
dtbs_check also warns about this.

> +				power-domains = <&hdmi_blk_ctrl 
IMX8MP_HDMIBLK_PD_PVI>;
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +						pvi_from_lcdif3: 
endpoint {
> +							remote-
endpoint = <&lcdif3_to_pvi>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						pvi_to_hdmi_tx: 
endpoint {
> +							remote-
endpoint = <&hdmi_tx_from_pvi>;
> +						};
> +					};
> +				};
> +			};
> +
> +			lcdif3: display-controller@32fc6000 {
> +				compatible = "fsl,imx8mp-lcdif";
> +				reg = <0x32fc6000 0x238>;
> +				interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;

irqsteer_hdmi has #interrupt-cells = <1>, so IRQ flags should be removed. 
dtbs_check also warns about this.

> +				interrupt-parent = <&irqsteer_hdmi>;
> +				clocks = <&hdmi_tx_phy>,
> +					 <&clk IMX8MP_CLK_HDMI_APB>,
> +					 <&clk 
IMX8MP_CLK_HDMI_ROOT>;
> +				clock-names = "pix", "axi", 
"disp_axi";
> +				power-domains = <&hdmi_blk_ctrl 
IMX8MP_HDMIBLK_PD_LCDIF>;
> +
> +				port {
> +					lcdif3_to_pvi: endpoint {
> +						remote-endpoint = 
<&pvi_from_lcdif3>;
> +					};
> +				};
> +			};
> +
> +			hdmi_tx: hdmi@32fd8000 {
> +				compatible = "fsl,imx8mp-hdmi-tx";
> +				reg = <0x32fd8000 0x7eff>;
> +				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;

irqsteer_hdmi has #interrupt-cells = <1>, so IRQ flags should be removed. 
dtbs_check also warns about this.

> +				interrupt-parent = <&irqsteer_hdmi>;
> +				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> +					 <&clk 
IMX8MP_CLK_HDMI_REF_266M>,
> +					 <&clk IMX8MP_CLK_32K>,
> +					 <&hdmi_tx_phy>;
> +				clock-names = "iahb", "isfr", "cec", 
"pix";
> +				assigned-clocks = <&clk 
IMX8MP_CLK_HDMI_REF_266M>;
> +				assigned-clock-parents = <&clk 
IMX8MP_SYS_PLL1_266M>;
> +				power-domains = <&hdmi_blk_ctrl 
IMX8MP_HDMIBLK_PD_HDMI_TX>;
> +				reg-io-width = <1>;
> +				status = "disabled";
> +
> +				ports {
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					port@0 {
> +						reg = <0>;
> +
> +						hdmi_tx_from_pvi: 
endpoint {
> +							remote-
endpoint = <&pvi_to_hdmi_tx>;
> +						};
> +					};
> +
> +					port@1 {
> +						reg = <1>;
> +						/* Point endpoint 
to the HDMI connector */
> +					};
> +				};
> +			};
> +
> +			hdmi_tx_phy: phy@32fdff00 {
> +				compatible = "fsl,imx8mp-hdmi-phy";
> +				reg = <0x32fdff00 0x100>;
> +				clocks = <&clk IMX8MP_CLK_HDMI_APB>,
> +					 <&clk IMX8MP_CLK_HDMI_24M>;
> +				clock-names = "apb", "ref";
> +				assigned-clocks = <&clk 
IMX8MP_CLK_HDMI_24M>;
> +				assigned-clock-parents = <&clk 
IMX8MP_CLK_24M>;
> +				power-domains = <&hdmi_blk_ctrl 
IMX8MP_HDMIBLK_PD_HDMI_TX_PHY>;
> +				#clock-cells = <0>;
> +				#phy-cells = <0>;
> +				status = "disabled";
> +			};

According to RM these blocks are part of AIPS4, so it should be below 
hsio_blk_ctrl.

Best regards,
Alexander

>  		};
> 
>  		aips5: bus@30c00000 {


-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/