[PATCH v10 6/7] arm64: meson: khadas-vim3l: add TS050 DSI panel overlay

[Neil Armstrong]

This add dtbo overlay to support the Khadas TS050 panel on the
Khadas VIM3 & VIM3L boards.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 arch/arm64/boot/dts/amlogic/Makefile               |   3 +
 .../boot/dts/amlogic/meson-khadas-vim3-ts050.dtso  | 108 +++++++++++++++++++++
 2 files changed, 111 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index cc8b34bd583d..5e5ea0f14fe2 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -80,3 +80,6 @@ dtb-$(CONFIG_ARCH_MESON) += meson-sm1-odroid-hc4.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-sei610.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air-gbit.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-sm1-x96-air.dtb
+
+# Overlays
+dtb-$(CONFIG_ARCH_MESON) += meson-khadas-vim3-ts050.dtbo
diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
new file mode 100644
index 000000000000..a41b4e619580
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3-ts050.dtso
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/g12a-clkc.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/amlogic,meson-g12a-gpio-intc.h>
+
+/dts-v1/;
+/plugin/;
+
+/*
+ * Enable Khadas TS050 DSI Panel + Touch Controller
+ * on Khadas VIM3 (A311D) and VIM3L (S905D3)
+ */
+
+&{/} {
+	panel_backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm_AO_cd 0 25000 0>;
+		brightness-levels = <0 255>;
+		num-interpolated-steps = <255>;
+		default-brightness-level = <200>;
+	};
+};
+
+&i2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	touch-controller@38 {
+		compatible = "edt,edt-ft5206";
+		reg = <0x38>;
+		interrupt-parent = <&gpio_intc>;
+		interrupts = <IRQID_GPIOA_5 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpio_expander 6 GPIO_ACTIVE_LOW>;
+		touchscreen-size-x = <1080>;
+		touchscreen-size-y = <1920>;
+		status = "okay";
+	};
+};
+
+&mipi_dsi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	assigned-clocks = <&clkc CLKID_GP0_PLL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK_SEL>,
+			  <&clkc CLKID_MIPI_DSI_PXCLK>,
+			  <&clkc CLKID_CTS_ENCL_SEL>,
+			  <&clkc CLKID_VCLK2_SEL>;
+	assigned-clock-parents = <0>,
+				 <&clkc CLKID_GP0_PLL>,
+				 <0>,
+				 <&clkc CLKID_VCLK2_DIV1>,
+				 <&clkc CLKID_GP0_PLL>;
+	assigned-clock-rates = <960000000>,
+			       <0>,
+			       <960000000>,
+			       <0>,
+			       <0>;
+
+	panel@0 {
+		compatible = "khadas,ts050";
+		reset-gpios = <&gpio_expander 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpio_expander 1 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vcc_3v3>;
+		backlight = <&panel_backlight>;
+		reg = <0>;
+
+		port {
+			mipi_in_panel: endpoint {
+				remote-endpoint = <&mipi_out_panel>;
+			};
+		};
+	};
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			mipi_out_panel: endpoint {
+				remote-endpoint = <&mipi_in_panel>;
+			};
+		};
+	};
+};
+
+&mipi_analog_dphy {
+	status = "okay";
+};
+
+&mipi_dphy {
+	status = "okay";
+};
+
+&pwm_AO_cd {
+	pinctrl-0 = <&pwm_ao_c_6_pins>, <&pwm_ao_d_e_pins>;
+};

-- 
2.34.1