Re: [PATCH v2] drm/panel: re-alphabetize the menu list

From: Neil Armstrong
Date: Tue Feb 06 2024 - 03:19:16 EST

Next message: Baolin Wang: "Re: [RFC PATCH] mm: hugetlb: remove __GFP_THISNODE flag when dissolving the old hugetlb"
Previous message: Neil Armstrong: "Re: [PATCH 4/5] drm/panel: simple: fix flags on RK043FN48H"
In reply to: Randy Dunlap: "[PATCH v2] drm/panel: re-alphabetize the menu list"
Next in thread: Neil Armstrong: "Re: [PATCH v2] drm/panel: re-alphabetize the menu list"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On 05/02/2024 07:27, Randy Dunlap wrote:

A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.

Signed-off-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Cc: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
Cc: Jessica Zhang <quic_jesszhan@xxxxxxxxxxx>
Cc: Sam Ravnborg <sam@xxxxxxxxxxxx>
Cc: Maarten Lankhorst <maarten.lankhorst@xxxxxxxxxxxxxxx>
Cc: Maxime Ripard <mripard@xxxxxxxxxx>
Cc: Thomas Zimmermann <tzimmermann@xxxxxxx>
Cc: David Airlie <airlied@xxxxxxxxx>
Cc: Daniel Vetter <daniel@xxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: Aradhya Bhatia <a-bhatia1@xxxxxx>
---
v2: rebase, move more driver entries around

Aradhya Bhatia <a-bhatia1@xxxxxx> had responded with Reviewed-by:
for v1, but I mode quite a few additions in v2 so I didn't include
that R-B: here.

drivers/gpu/drm/panel/Kconfig | 202 ++++++++++++++++----------------
1 file changed, 101 insertions(+), 101 deletions(-)

diff -- a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -76,53 +76,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6
Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
45NA WUXGA PANEL DSI Video Mode panel
-config DRM_PANEL_DSI_CM
- tristate "Generic DSI command mode panels"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- DRM panel driver for DSI command mode panels with support for
- embedded and external backlights.
-
-config DRM_PANEL_LVDS
- tristate "Generic LVDS panel driver"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
- help
- This driver supports LVDS panels that don't require device-specific
- handling of power supplies or control signals. It implements automatic
- backlight handling if the panel is attached to a backlight controller.
-
-config DRM_PANEL_SIMPLE
- tristate "support for simple panels (other than eDP ones)"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- help
- DRM panel driver for dumb non-eDP panels that need at most a regulator
- and a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
-config DRM_PANEL_EDP
- tristate "support for simple Embedded DisplayPort panels"
- depends on OF
- depends on BACKLIGHT_CLASS_DEVICE
- depends on PM
- select VIDEOMODE_HELPERS
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- select DRM_DP_AUX_BUS
- select DRM_KMS_HELPER
- help
- DRM panel driver for dumb eDP panels that need at most a regulator and
- a GPIO to be powered up. Optionally a backlight can be attached so
- that it can be automatically turned off when the panel goes into a
- low power state.
-
config DRM_PANEL_EBBG_FT8719
tristate "EBBG FT8719 panel driver"
depends on OF
@@ -162,6 +115,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
Say Y if you want to enable support for panels based on the
Feiyang FY07024DI26A30-D MIPI-DSI interface.
+config DRM_PANEL_DSI_CM
+ tristate "Generic DSI command mode panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ DRM panel driver for DSI command mode panels with support for
+ embedded and external backlights.
+
+config DRM_PANEL_LVDS
+ tristate "Generic LVDS panel driver"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+ help
+ This driver supports LVDS panels that don't require device-specific
+ handling of power supplies or control signals. It implements automatic
+ backlight handling if the panel is attached to a backlight controller.
+
config DRM_PANEL_HIMAX_HX8394
tristate "HIMAX HX8394 MIPI-DSI LCD panels"
depends on OF
@@ -251,17 +223,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3
WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
800RGBx1280 dots at maximum.
-config DRM_PANEL_JDI_LT070ME05000
- tristate "JDI LT070ME05000 WUXGA DSI panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for JDI DSI video mode
- panel as found in Google Nexus 7 (2013) devices.
- The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
- 24 bit per pixel.
-
config DRM_PANEL_JDI_LPM102A188A
tristate "JDI LPM102A188A DSI panel"
depends on OF && GPIOLIB
@@ -273,6 +234,17 @@ config DRM_PANEL_JDI_LPM102A188A
The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
to the host.
+config DRM_PANEL_JDI_LT070ME05000
+ tristate "JDI LT070ME05000 WUXGA DSI panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for JDI DSI video mode
+ panel as found in Google Nexus 7 (2013) devices.
+ The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
+ 24 bit per pixel.
+
config DRM_PANEL_JDI_R63452
tristate "JDI R63452 Full HD DSI panel"
depends on OF
@@ -326,12 +298,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
-config DRM_PANEL_SAMSUNG_LD9040
- tristate "Samsung LD9040 RGB/SPI panel"
- depends on OF && SPI
- depends on BACKLIGHT_CLASS_DEVICE
- select VIDEOMODE_HELPERS
-
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -359,6 +325,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
with the Magnachip D53E6EA8966 panel IC. This panel receives
video data via DSI but commands via 9-bit SPI using DBI.
+config DRM_PANEL_MANTIX_MLAF057WE51
+ tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to enable support for the Mantix
+ MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
+ has a resolution of 720x1440 pixels, a built in backlight and touch
+ controller.
+
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
@@ -447,17 +424,6 @@ config DRM_PANEL_NOVATEK_NT39016
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.
-config DRM_PANEL_MANTIX_MLAF057WE51
- tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y here if you want to enable support for the Mantix
- MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
- has a resolution of 720x1440 pixels, a built in backlight and touch
- controller.
-
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
@@ -554,6 +520,12 @@ config DRM_PANEL_RONBO_RB070D30
Say Y here if you want to enable support for Ronbo Electronics
RB070D30 1024x600 DSI panel.
+config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
+ tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
+ depends on OF
+ select DRM_MIPI_DSI
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_ATNA33XC20
tristate "Samsung ATNA33XC20 eDP panel"
depends on OF
@@ -577,6 +549,12 @@ config DRM_PANEL_SAMSUNG_DB7430
DB7430 DPI display controller used in such devices as the
LMS397KF04 480x800 DPI panel.
+config DRM_PANEL_SAMSUNG_LD9040
+ tristate "Samsung LD9040 RGB/SPI panel"
+ depends on OF && SPI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select VIDEOMODE_HELPERS
+
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
@@ -642,12 +620,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI
Say Y here if you want to be able to access the Samsung
S6E63M0 panel using DSI.
-config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
- tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
- depends on OF
- select DRM_MIPI_DSI
- select VIDEOMODE_HELPERS
-
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
@@ -746,15 +718,6 @@ config DRM_PANEL_SITRONIX_ST7789V
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
-config DRM_PANEL_SYNAPTICS_R63353
- tristate "Synaptics R63353-based panels"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- help
- Say Y if you want to enable support for panels based on the
- Synaptics R63353 controller.
-
config DRM_PANEL_SONY_ACX565AKM
tristate "Sony ACX565AKM panel"
depends on GPIOLIB && OF && SPI
@@ -794,6 +757,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015
with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
the host, a built-in LED backlight and touch controller.
+config DRM_PANEL_EDP
+ tristate "support for simple Embedded DisplayPort panels"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ select DRM_DP_AUX_BUS
+ select DRM_KMS_HELPER
+ help
+ DRM panel driver for dumb eDP panels that need at most a regulator and
+ a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
+config DRM_PANEL_SIMPLE
+ tristate "support for simple panels (other than eDP ones)"
+ depends on OF
+ depends on BACKLIGHT_CLASS_DEVICE
+ depends on PM
+ select VIDEOMODE_HELPERS
+ help
+ DRM panel driver for dumb non-eDP panels that need at most a regulator
+ and a GPIO to be powered up. Optionally a backlight can be attached so
+ that it can be automatically turned off when the panel goes into a
+ low power state.
+
+config DRM_PANEL_SYNAPTICS_R63353
+ tristate "Synaptics R63353-based panels"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y if you want to enable support for panels based on the
+ Synaptics R63353 controller.
+
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
@@ -837,6 +837,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
+config DRM_PANEL_VISIONOX_R66451
+ tristate "Visionox R66451"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ select DRM_DISPLAY_DP_HELPER
+ select DRM_DISPLAY_HELPER
+ help
+ Say Y here if you want to enable support for Visionox
+ R66451 1080x2340 AMOLED DSI panel.
+
config DRM_PANEL_VISIONOX_RM69299
tristate "Visionox RM69299"
depends on OF
@@ -854,17 +865,6 @@ config DRM_PANEL_VISIONOX_VTDR6130
Say Y here if you want to enable support for Visionox
VTDR6130 1080x2400 AMOLED DSI panel.
-config DRM_PANEL_VISIONOX_R66451
- tristate "Visionox R66451"
- depends on OF
- depends on DRM_MIPI_DSI
- depends on BACKLIGHT_CLASS_DEVICE
- select DRM_DISPLAY_DP_HELPER
- select DRM_DISPLAY_HELPER
- help
- Say Y here if you want to enable support for Visionox
- R66451 1080x2340 AMOLED DSI panel.
-
config DRM_PANEL_WIDECHIPS_WS2401
tristate "Widechips WS2401 DPI panel driver"
depends on SPI && GPIOLIB

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>

Next message: Baolin Wang: "Re: [RFC PATCH] mm: hugetlb: remove __GFP_THISNODE flag when dissolving the old hugetlb"
Previous message: Neil Armstrong: "Re: [PATCH 4/5] drm/panel: simple: fix flags on RK043FN48H"
In reply to: Randy Dunlap: "[PATCH v2] drm/panel: re-alphabetize the menu list"
Next in thread: Neil Armstrong: "Re: [PATCH v2] drm/panel: re-alphabetize the menu list"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]