Re: [net-next PATCH v6 05/10] dt-bindings: net: Document Qcom QCA807x PHY package

[Christian Marangi]

On Tue, Feb 06, 2024 at 04:32:29PM +0000, Conor Dooley wrote:
> Hey Christian,
> 
> On Mon, Feb 05, 2024 at 05:48:37PM +0100, Christian Marangi wrote:
> > Document Qcom QCA807x PHY package.
> > 
> > Qualcomm QCA807X Ethernet PHY is PHY package of 2 or 5
> > IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and
> > 1000BASE-T PHY-s.
> > 
> > Document the required property to make the PHY package correctly
> > configure and work.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> 
> I think this looks pretty decent, some minor comments.
> 
> > +  qcom,package-mode:
> > +    description: |
> > +      PHY package can be configured in 3 mode following this table:
> > +
> > +                    First Serdes mode       Second Serdes mode
> > +      Option 1      PSGMII for copper       Disabled
> > +                    ports 0-4
> > +      Option 2      PSGMII for copper       1000BASE-X / 100BASE-FX
> > +                    ports 0-4
> > +      Option 3      QSGMII for copper       SGMII for
> > +                    ports 0-3               copper port 4
> > +
> > +      PSGMII mode (option 1 or 2) is configured dynamically by the driver
> 
> I'd drop mention of the driver here, with s/by the driver//.
>

Sure.

> > +      based on the presence of a connected SFP device.
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    enum:
> > +      - qsgmii
> > +      - psgmii
> > +    default: psgmii
> > +
> > +  qcom,tx-driver-strength-milliwatt:
> 
> Is this a typo? Should not it be "drive-strength"? There's 39 mentions
> in tree of "driver-strength" and 3500 for "drive-strength".

In the PHY datasheet the reg is called TX_DRIVER and the description say
TX driver amplitude adjustment.

But the section is PSGMII/QSGMII drive control 1 register...

Guess it's a typo in the datasheet. Will change to drive.

> 
> Otherwise I think the review comments have been resolved:
> Reviewed-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
> 

Thanks!

-- 
	Ansuel