Re: [PATCH 4/4] arm64: dts: ti: k3-am62-wakeup: Add chip efuse nodes

[Andrew Davis]

On 2/6/24 8:37 AM, Markus Schneider-Pargmann wrote:
> Add efuse nodes describing chip variant and speed grade.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi | 36 +++++++++++++++++++++-
>   1 file changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> index fef76f52a52e..14419df43624 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
> @@ -14,10 +14,44 @@ wkup_conf: syscon@43000000 {
>   		#size-cells = <1>;
>   		ranges = <0x0 0x00 0x43000000 0x20000>;
>   
> +		wkup_efuse: efuse@0 {
> +			compatible = "socionext,uniphier-efuse";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			reg = <0x0 0x200>;
> +
> +			nvmem-layout {
> +				compatible = "fixed-layout";
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +
> +				chip_manufacturer: jtagidmfg@14 {
> +					reg = <0x14 0x2>;
> +					bits = <1 11>;
> +				};
> +
> +				chip_partno: jtagidpartno@15 {
> +					reg = <0x15 0x3>;
> +					bits = <4 16>;
> +				};
> +
> +				chip_variant: jtagidvariant@17 {
> +					reg = <0x17 0x1>;
> +					bits = <4 4>;
> +				};
> +
> +				chip_speed: jtaguseridspeed@18 {
> +					reg = <0x18 0x4>;
> +					bits = <6 5>;
> +				};
> +			};
> +		};
> +
>   		chipid: chipid@14 {

If you remove the reg property you will want to drop the @14
also or you will get a DT check warning. That needs fixed
in the binding example too (and the binding nodename pattern).

Andrew

>   			bootph-all;
>   			compatible = "ti,am654-chipid";
> -			reg = <0x14 0x4>;
> +			nvmem-cells = <&chip_variant>, <&chip_partno>, <&chip_manufacturer>;
> +			nvmem-cell-names = "chipvariant", "chippartno", "chipmanufacturer";
>   		};
>   	};
>