Re: [PATCH net-next 4/5] net: ravb: Do not apply RX checksum settings to hardware if the interface is down

[Sergey Shtylyov]

On 2/7/24 3:07 PM, Claudiu wrote:

> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> 
> Do not apply the RX checksum settings to hardware if the interface is down.
> In case runtime PM is enabled, and while the interface is down, the IP will
> be in reset mode (as for some platforms disabling the clocks will switch
> the IP to reset mode, which will lead to losing registers content) and

   The register contents? I thought I'd pointed out all of these...

> applying settings in reset mode is not an option. Instead, cache the RX
> checksum settings and apply them in ravb_open() through ravb_emac_init().
> This has been solved by introducing pm_runtime_active() check. The device
> runtime PM usage counter has been incremented to avoid disabling the device
> clocks while the check is in progress (if any).
> 
> Commit prepares for the addition of runtime PM.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Reviewed-by: Sergey Shtylyov <s.shtylyov@xxxxxx>

   I'm afraid such check now needs to be added to ravb_set_features_gbeth()
that's populated by Biju Das' checksum patches (which I've already ACKed)...

[...]

MBR, Sergey